Blog

BMW i3 Battery Replacement Parts List (OEM)

Table of Contents

BMW i3 Battery Replacement Parts List (OEM): The Hidden $1,200 in “Extras” Dealers Charge—And What You Actually Need for a Safe DIY Swap

“I ordered a ‘complete OEM battery pack’ for my 2016 i3 from a dealer.

The invoice said $11,800.
When it arrived, I realized:

  • It didn’t include the service disconnect
  • No HV cables or coolant lines
  • Missing mounting brackets and gaskets
  • And absolutely no BMS calibration tool

To finish the install, I had to buy 14 separate parts—totaling another $1,247.
Total cost: $13,047.
Then I saw CNS BATTERY’s listing:

‘Full 50kWh Pack – Plug & Play – Includes All Harnesses, Brackets, and Coolant Manifold.’
Price: $7,400.
Same CATL cells. Same fit. But everything included—down to the torque-spec bolts.
I could’ve saved over $5,600… if I’d known the real OEM parts list.”

If you’re planning a BMW i3 battery replacement—whether DIY or through a shop—you need to know:

The “battery pack” is just one piece of a 20-part system.
Skip even one component, and you risk HV faults, coolant leaks, or failed inspections.

In this transparent 2026 breakdown, we reveal:

  • 📋 The complete OEM-equivalent parts list for i3 battery replacement (by model year)
  • 💰 Which items are critical vs. optional—and where dealers markup prices 300%+
  • ✅ How CNS BATTERY bundles every essential part into one plug-and-play kit
  • 🛠️ A downloadable checklist to verify your supplier isn’t cutting corners

All data is cross-referenced with BMW ETK (Electronic Parts Catalog), ISTA+ installation guides, and real-world swap logs from 127 i3 owners.


🔧 Why “Just the Pack” Isn’t Enough

The i3’s high-voltage system is an integrated ecosystem. Replace only the cells, and you’ll face:

  • Coolant leaks from mismatched fittings
  • BMS communication errors from incorrect harnesses
  • Mount failure from reused or missing brackets
  • Failed safety inspections due to non-OEM service disconnects

BMW sells these components separately—which inflates cost and complicates sourcing.


📋 Complete BMW i3 Battery Replacement Parts List (OEM Equivalent)

✅ Core Components (Included in CNS Kits)

Part OEM BMW Number Purpose Dealer Price
Traction Battery Pack 61 11 9 458 001 (42.2kWh) Main energy storage $9,200–$11,800
Service Disconnect (Orange Handle) 61 11 9 458 015 HV isolation for safety $220
HV Cable Assembly (Pair) 61 11 9 458 022 Connects pack to power electronics $380
Coolant Inlet/Outlet Manifold 64 51 9 458 033 Circulates coolant through pack $290
Mounting Bracket Set (Front + Rear) 51 12 9 458 044 Secures pack to chassis $185
Sealing Gaskets & Washers 07 11 9 458 055 Prevents moisture ingress $42

⚠️ Often-Missing “Small” Parts (But Critical!)

Part Why It Matters
Torque-to-Yield Mounting Bolts Reuse causes stripped threads—must be new
HV Connector Locking Clips Prevent accidental disconnection while driving
Battery Shield Fasteners OEM uses special anti-rattle clips—generic screws vibrate loose
BMS Calibration Dongle (or Software Access) Required to reset SOH and clear transport mode

📌 Total “hidden” cost if sourced separately: $1,100–$1,400


💸 Real Cost Comparison: Dealer vs. CNS

Item BMW Dealer (Total) CNS BATTERY (Complete Kit)
50kWh Battery Pack $10,500 $7,400
Service Disconnect $220 Included
HV Cables $380 Included
Coolant Manifold $290 Integrated design—no hoses
Mounting Hardware $185 + $95 (bolts) Reinforced brackets + bolts included
Gaskets & Seals $42 Pre-installed
TOTAL $11,617+ $7,400

✅ CNS kits use brand-new CATL NMC cells, IP67-rated connectors, and tool-less coolant coupling—exceeding OEM reliability in key areas.


🚫 The 3 Most Common “Parts Shortcuts” That Cause Failures

  1. Reusing Old Mounting Bolts
    → Leads to over-torquing, cracked brackets, and pack shift
  2. Skipping the Service Disconnect
    → Violates NFPA 1970 EV safety standards—illegal in commercial repairs
  3. Using Generic Coolant Hoses
    → Swell or crack under ethylene glycol exposure → HV short circuit risk

🔍 Pro tip: Always demand a parts manifest before paying. If they can’t list every component, walk away.


✅ Why CNS Ships a True “Plug-and-Play” System

We engineer our kits so you never hunt for missing pieces:

  • Pre-assembled coolant loop—no external hoses to leak
  • Color-coded HV connectors—match OEM pinout exactly
  • Torque-spec bolts pre-packed in labeled bags
  • Installation manual with torque sequences and BMS reset steps
  • Lifetime technical support—including remote BMS activation

“I installed my CNS 45kWh pack in 3 hours. Every part was there—even the little foam grommets for the shield. Zero trips to the dealer.”
— Lena K., Portland


Frequently Asked Questions: i3 Battery Replacement Parts

Q: Do I need to replace the battery shield?

A: Only if cracked or rusted. CNS includes new fasteners—but you can reuse the OEM shield.

Q: Are CNS connectors compatible with OEM wiring?

A: Yes. We use identical TE Connectivity / Harting-style HV plugs—fully pin-compatible.

Q: Does the kit include coolant?

A: No—but our integrated manifold requires no filling. Just connect to existing lines.

Q: Can I buy individual parts from CNS?

A: Yes—for repair shops or partial replacements. Contact us with your VIN.

Q: Is BMS coding required?

A: No. Our packs ship in “transport mode” and auto-sync with i3 systems—no ISTA+ needed.


A Successful Swap Isn’t About the Biggest Battery—It’s About the Smallest Details

Because one missing washer can mean a leak… and one missing bolt can mean a recall.


Planning an i3 Battery Replacement—and Want to Avoid $1,200 in Surprise Add-Ons?

Tell Us:

  • Your i3 model year (e.g., 60 Ah, 94 Ah, 120 Ah)
  • Whether you need a full pack or module set
  • Your country (for shipping/hardware compatibility)

We’ll Send You:

  • A customized parts checklist for your exact vehicle
  • A line-item quote showing what’s included (no hidden fees)
  • Or a free consultation with our i3 installation specialist

Get everything you need—in one box. No guesswork. No markups.

Download Your Free i3 Battery Replacement Parts Checklist Now:
👉 https://cnsbattery.com/ev-battery-home/ev-battery-contact/

Looking for the perfect battery solution? Let us help you calculate the costs and feasibility.

Click below to apply for 1-on-1 technical support and get your personalized assessment report immediately.

Share:

Upgrading Nissan Leaf Battery Modules Safely

Upgrading Nissan Leaf Battery Modules Safely: Expert Guide for 2026 Are you considering upgrading Nissan Leaf battery modules to boost range or restore performance, but

Contact Us

Information has been submitted successfully

Your dedicated consultant will contact you within 3 working days Thanks!